VIEW BY MANUFACTURER :

SORT BY :

2005 BAUER BG 24 BS 70 C DRILL RIG

Model year: 2005

Engine type: CAT C 11

Engine power: 313 kW

Under carriage: UW 70 B
Main winch: 20 t

Auxiliary winch: 10 t
Rotary: KDK 220 K

Operation hours ca. 12,700 h

Incl. Kelly bar 24 m

VIEW MORE DETAILS
1 Photos

Bauer BC30 Diaphragm Wall Machine

Year 1997
Approx.23,400 hours
Includes the following:
Diaphragm Wall Machine on BS6100.5.113
Cutter Frame BC30
Cutter Wheel 100cm Dia.1 Set
Cutter Wheel 80cm Dia. 1 Set
Varisco Pumps 4 No
Desander 1 No.
Vacuum Center Plate 1 No.
Guide Frame 1 No.
Lifting Beam 1 No.
Concrete Stopper for Diaphragm wall Panel
G.I. Pipe 3″ x 6m with male & female fittings
Bentonite / Polymer Tank

VIEW MORE DETAILS
1 Photos

Bauer BG 22 H Drill Rig

Special Equipment:

  • Kelly rod 3 / with sound absorption
  • with refueling pump
  • hydraulic generator
  • steel construction for BV 1500/07
  • device for Bauer oscillator hydraulic
  • with mast support
  • rope pre-feed
  • basic plate 800 mm
  • main winch with free fall
  • auxiliary winchwith free fall
  • VDW hydraulic up to the basis sledge
  • 2 m mast prolongation
  • additional ballast
  • hydraulic device filled with bio oil
  • central lubrication
  • diesel particle filter
VIEW MORE DETAILS
1 Photos

BAUER BG 24 BS 70 C

Model year: 2005

Engine type: CAT C 11

Engine power: 313 kW

Under carriage: UW 70 B
Main winch: 20 t

Auxiliary winch: 10 t
Rotary: KDK 220 K

Operation hours ca. 14,500 h

Incl. Kelly bar 24 m

VIEW MORE DETAILS
4 Photos

BAUER BG22H

USED BAUER BG22H
Year 2003
Hours 12 800
CAT engine C7 – Useful power: 224kW
36 meters Kelly bar
In working condition

VIEW MORE DETAILS
0 Photos

BAUER BG25 YR 2009

USED Bauer BG25

Year 2009

Operating hours 7.000 approx.

Kelly bar interlocking 40 meters

Torque  245 kNm

VIEW MORE DETAILS
1 Photos

BAUER BV2000/7 CASING OSCILLATOR

Year 2003
The unit was working only few times in some operation
In full working conditions and almost unused.

VIEW MORE DETAILS
5 Photos

Bauer Cutter BC40 on Liebherr HS885HD crawler crane

USED Bauer Cutter BC40 on  Liebherr HS885HD crawler crane+Full desanding plant, all equipment from 2011.
-1 full sets till depth 38m
-2 full sets till depth 70m include a side Flaps.(not installed but packed in owner yard)
Hours cranes 7500 approx./Hours cutters 3700 approx.All equipment year 2011.
Full set what include:Crane/cutter/Desanding plant /kbkt pump/Bauer BP250 Pump.

VIEW MORE DETAILS
7 Photos

BAUER HD 460 POWER PACK FOR HYDROMILL DIAPHRAGM WALL

YEAR  2005

Diesel Engine Cat C9 260 kW 

 

Total capacity/ 460 l-min 

 

Working pressure/ 300 bar (Max pressure/ 350 bar)  

VIEW MORE DETAILS
2 Photos

Used BAUER BG 40 rotary drilling rig – year 2003

Has an operating weight of approx. 140 to and a torque of 367 kNm.

Base carrier Bauer Sennebogen BS 100 B, UW 130 B, Central lubrication system

Engine CAT C15 Rated output ISO 3046-1 433 kW @ 1800 U/min (rpm)

Exhaust Emission Standard EEC 97/68EC Stage 3 or EPA/CARB TIER III

Dieseltank Diesel tank capacity 800 l

Hydraulic oil tank capacity 900 l

Crawler type B 8 B

Track width (retracted/extended) 2.700 / 4.000 mm

Width of triple grouser track shoes 1.000 mm

Overall length of crawlers 6.000 mm

Traction force effective/nominal 790 kN / 930 kN

Travel speed 1,1 km/h

Crowd winch pressure / pull (effective) 460 / 460 kN 270 / 400 kN

Crowd pressure / pull measured at the casing drive adapter on the rotary drive 440 / 375 kN 355 / 315 kN

Stroke (kelly system) 10.100 mm 7.650 mm

Stroke (CFA system) 19.700 mm 19.350 mm

Speed (down/up) 6,0 / 6,0 m/min 3,5 / 7,0 m/min

Fast speed (down/up) 21 / 21 m/min 18 / 18 m/min

Main winch classification M6 / L3 / T5

Line pull ( 1st layer) effective/nominal 300 / 384 kN

Rope diameter / Length 36 mm / 90 m

Line speed max. 60 m/min

Auxiliary winch classification M6 / L3 / T5

Line pull ( 1st layer) effective/nominal 130 / 162 kN

Rope diameter / Length 22 mm / 60 m

Line speed (max.) 60 m/min

Included options:

Crowd winch system: mast extension 4 m

Freefall main winch

Freefall auxiliary winch

Swivel for auxiliary rope

Mast access ladder

Mast support unit

Upper kelly guide

Auger cleaner (for kelly system)

Central lubrication system

Additional spotlight set

Automatic casing drive adapter

Torque multiplier kelly  technique

Oscillator attachment (max. BV 2000 HD-07)

 

Rotary drive KDK 367S, torque of 367 kNm

VIEW MORE DETAILS
1 Photos

©2016 FRONTLINE CONSTRUCTION EQUIPMENT - ALL RIGHTS RESERVED

X

Request Pricing

image