Pile Driving
VIEW BY MANUFACTURER :
SORT BY :
ABI TM 12/15 RIG WITH SEVERAL ACCESSORIES
Year of Manufacture 1994
Current Hours 19.507
Base Machine
Manufacturer Zeppelin
Model ZP 28T R35
Engine
Manufacturer Caterpiller
Model 3406
Attachments
Leader
Manufacturer ABI
Model TM 12/15
The rig has been upgraded by ABI to accept
MRZV 12V Vibratory Hammer (not supplied)
The rig is currently used as a pre-augering rig with attached auger motor & flights.
INCLUDING:
DCP-ADU 1-2 Auger Motor
Year of Manufacture 1994
Manufacturer DCP
Model ADU
Auger Touque 2.25Te
Auger Strings
250mm Diameter
2 x 5mtr
1 x 3mtr
1 x 400mm Clay Head
300mm Diameter
2 x 5mtr
1 x 4mtr
1 x 1mtr Rock Head
350mm Diameter
1 x 6mtr c/w Integral Clay Head
THE UNIT IS IN GOOD WORKING CONDITION
VIEW MORE DETAILS
ABI TM 18/22 PILING RIG – YEAR 2013 – COMPLETELY UNUSED BY THE FIRST OWNER!
MOBILRAM TM 18/22 B
The unit includes:
parallelogram kinematics in B-version to adapt the unit onto a carrier
incl. main boom with pins and other connecting components
pair of main boom hydraulic cylinders, incl. safety valves and hydraulic hoses
folding down, slewing and adjusting device
including transport supports on the substructure of the carrier
mast slew ratio +/- 90°
hydraulically actuated box shaped telescopic leader mast
-version TM 18- in torsional and flectional strength design, stroke 18,00 m (59,04`)
max. torque absorption 12.000 daNm (88.500 lb-ft)
telescopic leader mast hoist cylinder
to increase the stroke to 22,00 m (72,16`)
completely installed with 2 speed circuitry
hydraulic-rapid changing device with docking-system/D4
(registration no. EP 1193349 A2)
mounted into the guide sledge
with vibration resistant hydraulic and electrical connectors in unique ABI design
-instead of standard version-
Quantity CONTROL-SYSTEM
Control system for all functions of the MOBILRAM.
All relevant information are displayed on an easy to read Touch-Screen
(menu language: English, German and Russian).
For the various working applications and operating modes (rigging and de-rigging,
maintenance, fault finding / diagnostic tool) individual menus are available.
A self-check on the complete control system is continuously in action and a possible malfunction will be immediately displayed.
Control system consisting of:
* electrical and / or hydraulic joy sticks as well as foot pedals for proportional and sensitive
control of movements including all selector switches
* screen in colour LCD display
* SPS decentral control system with CAN-BUS communication
* distributor box with circuit breaker for the electronics
* external emergency control set
Accessories and added features for control system
1 tachometer for vibrator standard
1 leader alignment automatic standard
1 pre-selection of down crowd / extraction force standard
1 joy stick engagement for function vibrator standard
1 depth reader (magnetic stripe / contact free)
1 pressure reader for crowd / extraction force
1 recording system
The unit has to be equipped with depth reader and pressure reader.
Consisting of:
* additional display
* drive for memory USB-Stick
(evaluation program via spread sheet analysis)
* USB-Stick -min. 256 MB – for data securing
recording of the following parameters are possible
* date and time * pile number
* depth * pressure on tool
* frequency and revolutions * crowd pressure
* static moment of vibrator eccentrics * VDW mode, concrete flow and pressure
including thermo printer
Quantity CONTROL-SYSTEM
Accessory and added feature for control system
1 data representation tool (graphical)
Including:
- Selection between graphical and tabular display. The data interpretation can be altered between depth or time.
- The site data for various work procedure are filed in a “directory tree”.
- Paper print out or PDF files are possible.
- Individual points in graphic can be edited with comments.
- The length of the time axis can be adjusted.
- A zoom and ruler function are available for better analysing the data curves.
- Menu languages: English, German and Russian
Quantity Accessories for TM 18/22 B
INSTALLATION KIT for working with additional attachments
1 installation kit for an oil flow adjusting device standard
1 installation kit for diesel pile hammer standard
1 installation kit for vibrator gear oil cooling circuitry standard
cooling capacity 20 kW
to increase gear oil change intervals
(essential for driving operation with high duty cycles
like soil compaction or cut-off wall installation)
1 installation kit for resonance free vibrator type MRZV – V and MRZV – VV
to adjust the static moment, frequency and variable displacement as required
1 installation kit for HYDRO-PRESS-SYSTEM
in version cable remote and radio remote control
1 installation kit for double auger head system VDW (for VDW 6240 and VDW 8360) /
TWIN MIX (for TMBA 2-….) / SINGLE MIX (for MDBA ….-2)
WINCH 50 kN
complete with controls, incl. winch rope, swivel and safety hook
1 hydraulic winch assembly –50 kN (5 metric ton) lifting force- 1. layer
hydraulically slewable, ball bearing mounted, rope speed 35 m/min
In order to stay within the standard transport width and to shorten the set-up
time on site, the pulley frame can be folded back hydraulically.
Painting: RAL 7012 (grey)
Quantity Accessories for TM 18/22 B
ADDITIONAL
1 Painting:
MOBILRAM, MRZV and VDW –uni colour- ABI green standard
1 central lubrication
with level indicator, control and fault indication in driver’s cabin
inclusive charging cylinder and standard gear cartridge
Quantity ATTACHMENT for TM 18/22 B
PILE DRIVING AND EXTRACTION VIBRATOR
with variable static moment, variable displacement and integrated gear oil filtration
(only in conjunction with installation kit for resonance free vibrator MRZV–VV and cooling circuitry)
incl. adjustable back plate, jaw assembly K 34 and storage frame
1 MRZV 30 VV (centrifugal force 1500 kN / 150 metric ton)
in DOCKING version D4
static moment 0 – 30 kgm / max. revolution 2600 rpm
Mounted onto:
BASE CARRIER SR 35 T (C-series)
in Mobilram-Modification
Quantity Basic Model
1 BASE CARRIER SR 35 T (series C) 0
with standard connection
Diesel engine
Power package with CATERPILLAR diesel engine C18 ACERT
470 kW (630 HP) / 1800 min-1
(EU Stage IIIA / US EPA Tier 3)
Water-cooled, dry air filter, dirt indicator, diesel tank capacity approx. 800 l
Electric system 24 V DC, 2 highly efficient cold starting accumulators 12V DC 150 Ah
Hydraulic system up to 2 x 370 l/min, 1 x 200 l/min und 1 x 125 l/min
Fuel and lubricant specifications:
- Diesel fuel according to EN 590 or ASTM D975 1-D or 2-D
- FAME Biofuel up to B20 (20 percent)
- Engine oil according to API CJ-4
Due to legislation placing on the market and putting into service of EU Stage IIIA / US EPA Tier 3 certified engines is only possible in less regulated countries outside of EU / USA, see also respective requirements of country of destination.
Hydraulic system
Hydraulic tank capacity approx. 700 l / contents approx. 570 l
Healthy oil temperature through large dimensioned hydraulic cooling system.
Central service tableau for easy and quick control of the complete hydraulic system,
servo-assisted joy-stick control according to ISO-system
Swing system
The swing function is operated through a separate hydraulic circuit via axial-piston motor,
spring-loaded hydraulically releasable multiple-disk brake, planetary gear and pinion shaft.
Large dimensioned external geared slewing ring, swing speed 0 – 2,0 rpm, hydraulic motor
with integrated brake valves for wear-resistant braking
Upper structure
Counter weight approx. 6,0 t. –Additional counter weight according to demand-
Torsion-free upper frame with continuous bearing-plates from boom hinge
back to counter weight for optimal force introduction. Higher boom hinges,
steel bushes for the boom hinge, special sound insulation for the engine
Hydraulically extendable under carriage type T 41/380
with crawler B6 (55 track shoes), track gauge 2,3 – 3,8 m,
drawbar pull approx. 560 kN,
incl. Maintenance-free B6 track (55 track shoes) with 900 mm
triple bar track shoes “canted” (transport width 3,40 m)
including 2 pcs. two-stage track motors for higher travel speed (0 – 2,0 km/h)
and standard swivel joint 12-fold (NW 25) hydraulically
Page 5 / A67700
Quantity Basic Model SR 35 T “series C”
Standard equipment
Four-way steering lever / foot pedal steering, tools and accessories,
central connection for support cylinder, electric refueling pump,
2 pieces hand fire extinguisher PD 6, first aid box
Paintwork
upper carriage RAL 9018 (papyruswhite)
undercarriage, air scoops and cabin RAL 7022 (umbragrey)
Quantity Accessories for SR 35 T “series C”
EFFICIENCY DRIVE SYSTEM
1 installation kit for EFFICIENCY DRIVE (type I)
Typically, the vibrator does not utilize the maximum available working pressure at all
times. Short periods of reduced activity combined with easier driving conditions cause
the vibrator to operate in the partial load range for much of the working day. Despite
this, the unrestricted oil flow causes just the same hydraulic and mechanical losses
to occur as under the full load condition. The Efficiency Drive System reduces the
hydraulic oil flow generated at the pumps whilst also regulating the displacement
of the hydraulic motor at the MRZV – VV to maintain optimum vibrator performance.
This results in significant reductions in fuel consumption, noise emissions and machine
wear. The resultant percentage fuel saving is generally in the double digits, but piling
performance remains totally unaffected!
OPERATORS´S CAB F 2000
1 FOPS guard for roof (tier 2) painted in RAL 7022 (grey) standard
1 Extended comfortable F 2000 operator´s cab, resiliently mounted, with exceptional standard
sound suppression, large-capacity compartment with excellent all-round visibility,
all-weather design with tinted safety glass, door window as sliding-window,
front window wiper/washer system for front windscreen and skylight,
front guard panel, large-capacity storage rack
1 Air conditioner and infinitely variable cab heating system, outside air standard
and circulating air stages, with particle filter, five adjustable air vents for
optimum work environment
1 Radio with CD-Player standard
1 Lighting system consisting of: standard
1 working light (24 V / 110 Watt) on the cab roof, left side and
1 working light (24 V / 110 Watt) mounted on the right side at the bottom of the
upper structure
1 Rotating beacon at the cab standard
1 Ergonomically designed comfortable operator’s seat, resiliently mounted, adjustable in standard
suspension and height, seat cushion adjustable in depth and angle, mechanically
adjustable lumbar support, clearly laid out instrument panel and headrest
Quantity Accessories for SR 35 T (series C)
ADDITIONAL EQUIPMENT
1 Interval horn for travel and swing
1 Camera-Monitor-System for rear and right side area
with monitor inside of the cabin
1 Camera mounted onto the pile driving and extraction vibrator
for a save observation of the clamping process
(Only in conjunction with the camera-monitor-system!)
1 Grated step on side of cab (removable)
1 Grated step in front of cab
1 Hydro-Clean: Hydraulic micro filter system with water absorption standard
and contamination indicator (higher oil purity and extended oil service life),
1 Fuel tank monitoring
with alarm via/by SMS notification
An appropriate SIM card or mobile phone contract for the modem must be provided
by the customer!
1 Winterization package (recommended for operation below – 5° C (23° F)
consisting of:
– additional independent diesel heating system with timer
– preheating unit for hydraulic tank
– preheating for cooling water
– CAT diesel filter with electric heating system
– electric heating plate batteries
VIEW MORE DETAILS
Casagrande C600HT H40 Piling Rig
USED CASAGRANDE C600HT H40 PILING RIG
WITH ROTARY PILING KIT AND KRC DIAPHRAGM WALL KIT
Manufactured in 2006
Operating weight approx 90t (in rotary mode)
Basic rig consisting of
- Undercarriage with expanding tracks, 3.3 – 4.4m, with steel track pads, 900mm wide
- Superstructure with Deutz diesel engine VF8M 1015C, 400kW
- Main winch, 25t capacity
- Auxiliary winch, 11t capacity
- Heavy duty mast mounted on HT type support
- Rotary head type H40, max torque 36 ton.m
Rotary piling kit, consisting of
- Straight type jib head
- Crowd winch system, max crowd/extraction 40t
- Upper kelly guide
- Mast foot with hydraulic stabilizer
- Interlocking kelly bar
Diaphragm wall kit, consisting of
- Support for KRC mast
- Rotation table
- Kelly bar
- Set of hydraulic hose recovery reels and hoses
- K Grab 3000HD with 1no set of jaws
Giken SW150 Pile Press W/ EU200 Tracked Power Pack
YEAR 1999
OPERATING HOURS ABOUT 7000
JUNTTAN PM 20 LC
USED JUNTTAN PM 20 LC RIG / GEBRAUCHTES JUNTTAN PM 20 LC RIG
YP / BJ: 2000
OPERATING HOURS 20,000
WITH HHK 5 A HYDRAULIC IMPACT HAMMER
The machine is from 2000. Some recent maintenance:
- Engine rebuilt in 2016
- Tracks overhauled in 2013
- New seals in bracket cylinders 2016
Enclosed are some pictures and technical details of this particular machine.
Please note that the hammer winch on the pictures is still broken and should be repaired! We can mount a completely new winch to the machine against additional cost and make sure it is in good working condition .
VIEW MORE DETAILS
Soilmec SF-70 CFA
USED Soilmec SF-70 CFA
Year 2008
9000 hours
Max. pile depth 28m.
Max. pile diameter 1000 mm.
CFA kit:
lower auger guide
concrete pipe on the mast
pulley block on the rotary
swivel
“Swan neck”
extension 6000 mm.
Jean Lutz Registration System
Hydraulic auger cleaner
Hydraulic vibrohammer
Good working condition. Immediately available.
SOILMEC TUNNEL DRILL SM605
SOILMEC TUNNEL FOR PILING MACHINE MODEL SM 605 DT
YEAR 2001
OPERATING HOURS ARE UNKNOWN; BUT THE UNIT HAS NOT WORKED SO MUCH!
ENGINE HOUR METER IS 240 HOURS! BUT PLEASE NOTE THAT THE UNIT WORKED BY THE ELECTRIC MOTOR INSIDE THE TUNNEL AND ENGINE WORKED WHEN MOVING BY CRANE!
IN GOOD AND WORKABLE CONDITION
JUST THE HYDRAULIC HOSES SHOULD BE REPLACED AS THE UNIT HAS NOT WORKED FOR SEVERAL YEARS NOW AD THE HOSES RE DETERIORATED
VIEW MORE DETAILS
USED Mait HR130 piling rig
USED ORTECO CRAWLER PILEDRIVER 600 From 2003
USED ORTECO CRAWLER PILEDRIVER 600 From 2003 – 7200 hours : 30 000 €
This unit is from 2003 with 7200 hours
with new paint, new tools box, new flash light, all maintenance done, new filters, new engine oil and new hydraulic oil, new battery, azote and seals in hammer checked/changed)
VIEW MORE DETAILS
YUTONG YTR260
PILE DRILLING RIG WITH TORQUE MAX 258 KNM FOR KELLY AND SOB DRILLING;MAX DRILLING DIAM 2000 MM;
MAX DRILLING DEPTH 68 M; CARRIER: CATERPILLAR TYPE 330 C;
KELLY DRILLING, INCL. Kelly 3/30, pin 200,
CFA DRILLING (new) with FORK MAST HEAD, CONCRETING HEAD with pressure indicator, CONCRETING KELLY 8 m, LOWER GUIDE 1200 mm etc.
Details
· Yutong
· YR 2006,
· Type:YTR 260
· OPERATING HOURS 8100
· NOMINAL SIZE / 258 kNm
· CONDITION VERY GOOD